The Check Engine Light of your Vehicle

Tips for Better Driving
May 1, 2017
When the Headlights should be inspected
May 22, 2017
Show all

The Check Engine Light of your Vehicle

 

 

The most common reason that your check engine light comes on is because it is time for regular maintenance to be done. Some manufacturers will set the vehicle so that the light will turn on at regular intervals after being serviced. It will do this even when there is nothing mechanically wrong with the vehicle. After bringing the vehicle in for routine fluid checks and oil changes, we will be able to turn the light off so you can continue driving without the distraction of the check engine light. If the light is on, we can have it diagnosed based on the computer. This can help to provide you with a safe and reliable vehicle again.

 

Belts have a tendency to slip or loosen as they wear. These can cause mechanical problems including timing issues. When the computer registers these issues, it will indicate that it is time to replace the belts. Making sure that you bring the vehicle in to service the engine soon will reduce further issues from forming in the vehicle. Ignoring the problem of the check engine light will only make the problem worse. You can also inspect the belts to see what condition they are in. If you notice a crack or damage, make sure to have them replaced as soon as possible.

 

Whenever the temperature of the engine starts to rise past the normal range, it can send warning signals to the computer. The check engine light is a warning to let you know that there is a possibility of further problems you might be encountering with your vehicle so you will be able to get it fixed as quickly as possible. Often, the issue with possibly overheating can be alleviated by topping off coolants or repairing radiators. If the vehicle starts to overheat, make sure to pull over where it is safe and turn it off. This can help prevent further damage happening to parts of the vehicle and engine. If you notice the vehicle overheats quickly, make sure to bring it in. Catching an issue at the first sign can help you to save time, money, and stress in the long run.

 

Comments are closed.